Ross CrossOver 6 Manuale dell'Operatore Scaricare il pdf (Pagina 27)

CrossOver 6 / 12 User Manual (v4.0) Configuration • 2–11

3. Use the Rate knob to select the units used to

specify switcher transition rates. You can choose

from the following:

• Frames — Switcher transitions are specified

in frames.

• Secnds — Switcher transitions are specified

in seconds.

Double-Press Rate

You can set the double-press rate of the switcher to

suit your preference. Setting a fast rate requires you

to double-press the knobs in quick succession in

order to be recognized as a double-press. Setting a

slow rate allows more time between presses but may

To set the switcher double press rate:

1. Press MENU.

2. Press the PERS Wipe Pattern button.

3. Press the DblPrs Speed knob.

4. Double-press the middle knob at a rate you

feel is comfortable. This defines the

double-press rate.

5. Press MENU to save the setting.

Resource Sharing

The switcher can use one Chroma Key and two

channels of DVE simultaneously. You can specify

how the Chroma Key is shared between keys and the

DVE resources are shared between keys and the

transition area on your switcher.

To specify resource sharing:

1. Press MENU.

2. Press the SYSTEM Wipe Pattern button.

3. Press the Rsrc Mode knob to display the

Resource Mode menu.

4. Use the ChrKey knob to select how the

Chroma Key resource is shared between keys.

You can choose from the following:

• KEY1 — The Chroma Key is locked to Key

1. Only Key 1 can display a Chroma Key.

• KEY2 — The Chroma Key is locked to Key

2. Only Key 2 can display a Chroma Key.

• KEY3 (CrossOver 12 only) — The Chroma

Key is locked to Key 3. Only Key 3 can

display a Chroma Key.

• FLOAT — The Chroma Key can be used by

any key. If another Chroma Key is on-air, you

are prompted to capture the Chroma Key

resource for the new key.

• ASK — The Chroma Key can be used by any

key. If another Chroma Key is in-use (on or

off-air), you are prompted to convert the

original Chroma Key to an Auto-Select Key,

take it off-air, and use the Chroma Key

resource for the new key.

5. Press the ChrKey knob to select the

Chroma Key sharing mode.

6. Use the DVE1 knob to select how the first

DVE resource is shared between keys and the

transition area. You can choose from the

following:

• KEY1 — DVE channel 1 is locked to Key 1.

• KEY2 — DVE channel 1 is locked to Key 2.

• KEY3 (CrossOver 12 only) — DVE channel

1 is locked to Key 3.

• TRANS — DVE channel 1 is locked to

performing transitions.

• FLOAT — DVE channel 1 can be used by

any key or to perform a transition. If two

channels of DVE are in use and on-air and

you attempt to use a DVE channel, you are

prompted to steal one of the DVE channels.

• ASK — DVE channel 1 can be used by any

key or to perform a transition. If two channels

of DVE are in use (on or off-air) and you

attempt to use a DVE channel, you are

prompted to steal one of the DVE channels.

7. Press the DVE1 knob to select the sharing

mode for the first DVE resource.

8. Use the DVE2 knob to select how the

second DVE resource is shared between keys

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 85 86

Commenti su questo manuale

Nessun commento

Ross CrossOver 6 Manuale dell'Operatore Pagina 27

Commenti su questo manuale

Prodotti e manuali riguardandi Schede madri Ross CrossOver 6